Va19/Yg-19/25/32 Pneumatic Steel Strapping Tools

• After-sales Service: Lifelong After-Sales Service
• Warranty: 1 Year for Whole Product,3 Months for Wear Parts
• Application: Waste Paper, Steel Pipe, Steel Coil, Household Chemicals, Aluminium,Stone,Brick,Wooden,Metal
• Strapping Material: Strip
• Packaging: Box
• Automatic Grade: Manual
• Model NO.: VA19/YG-19/25/32
• Strapping Mode: Buckling Type
• Packaging Material: Metal
• Driven Type: Manual or Pneumatic or Battery Powered
• Structure: Hand Strapping
• Type: Manual or Pneumatic or Battery Powered
• MOQ: 1PCS
• Transport Package: Carton
• Specification: 13, 16, 19, 25mm
• Trademark: Octopus Packing
• Origin: China
• Production Capacity: 1000PCS/Month

Product Description

VA19/YG-19/25/32 Pneumatic Steel Strapping Tools
Product Paramenters

Machine tension:	4500N
Applicable consumables:	steel strip
Steel strip width:	19mm
Tightening speed:	7.4cm/s Steel strip
thickness:	0.4~0.8mm
Air pressure:	0.49-0.63MPa
Biting method:	single bite buckle
Lock buckle strength:	75% steel strip strength
Model size:	420 * 130 * 165mm
Single machine weight:	4.6KG

HOW TO USE

1. Packaging straps

Place the steel belt buckle on the steel belt used for bundling, wrap the steel belt around the object and then insert it into the steel belt buckle to form the upper and lower steel belts. Finally, bend the head of the lower steel belt about 50mm beyond the steel belt buckle to achieve the initial fixing effect of the steel belt buckle

 

2. Confirm air pressure Connect the packaging machine to the air pump and use the default factory settings for packaging. If the packaging effect is not ideal, adjust the air pressure value reasonably based on the actual packaging effect. (Working pressure is 0.49-0.63MPa) Note: The valve core can be fine tuned to adjust the pressure value.

3. Tighten the packaging strap

Grasp the machine handle with your right hand, spread the distance between the tensioning wheel and the tensioning tooth plate to the upper limit, clip the threaded steel belt into the conveyor belt of the packaging machine, and push the packaging machine forward to align the steel belt buckle with the locking buckle.

4. Tighten the locking buckle Press the tension switch, and the packaging machine will enter automatic tension work. When the tension reaches the ideal state, release the tension switch, press the locking switch, and the packaging machine will enter automatic locking belt cutting work.

5. Complete removal

After the riveting is completed, hold the machine lifting handle with your right hand to open the distance between the tensioning wheel and the tensioning tooth plate to the upper limit, and take out the packaging machine from the right side.